HOME / Pulley Type Wire Drawing Machine
The LS-550 Pulley Type Wire Drawing Machine is designed for continuous drawing and diameter reduction of steel wire, iron wire, and other suitable metal wire materials. Equipped with four drawing wheels, this machine provides a multi-stage drawing process for producing wire with a final diameter of approximately 1.2 mm from an input diameter of up to 6.5 mm.
With a production speed of 150–200 meters per minute, the LS-550 can achieve an
estimated capacity of 1,500–2,000 kg during an 8-hour working period, depending on the material and operating conditions. Its dry drawing configuration makes it suitable for manufacturers looking for an efficient solution for continuous wire processing.
The machine is equipped with a 44 kW motor system and a variable-frequency electrical control cabinet for convenient speed adjustment. With its robust construction and compact industrial design, the LS-550 Wire Drawing Machine can be integrated into wire nail manufacturing and other metal wire processing lines. It is a practical choice for customers seeking reliable wire drawing equipment for continuous production.
The LS-550 works by pulling metal wire continuously through a series of drawing
dies. Each drawing stage gradually reduces the wire diameter while maintaining
controlled material movement. The four drawing wheels provide traction and help
keep the wire moving smoothly through the drawing process. As the wire passes
through progressively smaller dies, its cross-sectional area is reduced until the
required diameter is achieved. The variable-frequency control system allows the
operating speed to be adjusted according to production requirements. During dry
drawing, suitable drawing powder can be used to reduce friction and heat between the wire and drawing dies, supporting stable and continuous operation.
| Item | Specification |
|---|---|
| Model | LS-550 |
| Machine type | Pulley type wire drawing machine |
| Drawing method | Dry wire drawing |
| Number of drawing pulleys | 4 pulleys |
| Applicable wire diameter | 6.5 → 1.2 mm |
| Production speed | 150–200 m/min |
| 8-hour production capacity | 1,500–2,000 kg |
| Motor power | 44 kW |
| Additional motor configuration | 15 kW motor |
| Control system | Frequency conversion electric box |
| Machine weight | 3,200 kg |
| Dimensions (L × W × H) | 4400 × 1000 × 1250 mm |
The LS-550 is mainly used to reduce and size the diameter of steel wire, iron wire,
and other suitable metal wire materials for further processing.
The listed working range is approximately 6.5 mm to 1.2 mm. The actual finished diameter depends on the raw material, drawing dies, and process configuration.
The reference production capacity is approximately 1,500–2,000 kg per 8-hour working period, with a production speed of around 150–200 meters per minute.
Yes. The machine is supplied with a variable-frequency electrical control cabinet, allowing the operating speed to be adjusted according to production needs.
Yes. The drawn wire can be used as feedstock for suitable downstream applications, including wire nail manufacturing, provided that the finished wire diameter and material properties meet the requirements of the following production equipment.
The LS-550 Pulley Type Wire Drawing Machine is a reliable dry wire drawing solution for iron wire and steel wire processing. With a 4-pulley drawing structure, wide wire diameter range, stable production speed, and strong industrial design, it is suitable for manufacturers requiring efficient wire reduction and continuous production.
For customers producing nail wire or other metal wire products, the LS-550 can be integrated with other wire processing equipment to create a complete manufacturing solution.
